Roller conveying shot blasting equipment

Using the high-speed projectile flow beam thrown by the high-efficiency shot blasting machine to hit the oxide skin, rust layer and sundries on the surface of the sucker rod, so as to obtain a fine and bright surface, and make the workpiece show the metal color, which is helpful to improve the coating quality of the drill rod, achieve the purpose of anti-corrosion, pipe protection and prolonging the service life of the steel pipe.

This machine is the preferred equipment for shot blasting of the outer wall of the sucker rod within the diameter range of Φ 16 - Φ 51mm.

Technical parameters 1. Cleaning workpiece specification

(1) diameter Φ 16 - Φ 51mm

(2) length: 9m

2. Cleaning speed 1-5m / min

3. shot blasting machine

(1) power 4 × 22kw

(2) shot blasting quantity 4 × 320kg / min

(3) ejection speed 80m / S

4. separator

(1) wind speed in separation area 4-5m / S

(2) lifting capacity 90t / h

5. hoist

(1) lifting capacity 90t / h

(2) power 7.5kw

6. Screw conveyor

(1) conveying capacity 90t / h

(2) power 4kw

7. Conveying roller table

(1) conveying speed 1-5m / min (speed regulation)

(2) power 5.5kw

8. Dedusting system

(1) dust collector model fsb56

(2) processing air volume 13000m / h

(3) power: 14.37kw